DETAIL DESCRIPTIONS OF VCS PRO SERIES COMPONENT SUBWOOFERS:
Don't even think about this sub unless you have a
serious, over-the-top love of tight, deep bass. The 10" TS-W2541DVC will be
in your face with 700 Watts of clean power, and features Pioneer's Voice
Coil Cooling System (VCCS) to keep the temp down and the sound quality high,
despite hours of nearly criminal power levels. And, a dual voice coil design
allows you some extra system options.
|
Features
 | 10" Foamed IMPP (Injection Molded Polypropylene) Rigilite Composite Cone Woofer |
| Dual-Layer Urethane Surround |
| Direct Bobbin Mounted VCCS (Voice Coil Cooling System) |
| Conex Damper with Damper Ring |
| Lead Wires Integrated into Damper for High Reliability and Improved Power Transfer |
| Projected Pole Yoke with Vented Pole |
| High-Energy Ferrite Magnet with Bumped Back Plate |
| Low-Q Design for use in Small Sealed Box (0.8 cubic foot recommended) |
Specifications
| 500 Watts Max Music Power |
| 250 Watts Nominal Power Handling |
| Frequency Response: 18-2,500Hz |
| Sensitivity (Efficiency): 87dB (1W/1m) |
| 4ohm Rated |
TS-W254DVC
Features
| 10" Foamed IMPP (Injection Molded Polypropylene) Rigilite Composite Cone Woofer |
| Dual-Layer Urethane Surround |
| Direct Bobbin Mounted VCCS (Voice Coil Cooling System) |
| Conex Damper with Damper Ring |
| Lead Wires Integrated into Damper for High Reliability and Improved Power Transfer |
| Projected Pole Yoke with Vented Pole |
| High-Energy Ferrite Magnet with Bumped Back Plate |
| Low-Q Design for use in Small Sealed Box (0.8 cubic foot recommended) |
| Dual Voice Coil (2x4ohm) Design for Increased System Flexibility |
Specifications
| 500 Watts Max Music Power |
| 250 Watts Nominal Power Handling |
| Frequency Response: 18-2,500Hz |
| Sensitivity (Efficiency): 87dB (1W/1m) |
| 2ohm or 8ohm Rated |
The evil twin of the TS-W3041DVC: same blistering 800
Watts of power handling, same tight audio, but it's 4-ohm rated (vs. 2 or
8). This 12" sub features our patented Voice Coil Cooling System (VCCS),
drawing heat away and keeping sound quality high, despite being subjected to
hideous amounts of power by you. Plus, a high-energy strontium magnet adds
to the mobile mayhem. If desired, install it in a small sealed box (1.0
cubic feet recommended).
|
Features
| 12" Foamed IMPP (Injection Molded Polypropylene) Rigilite Composite Cone Woofer |
| Dual-Layer Urethane Surround |
| Direct Bobbin Mounted VCCS (Voice Coil Cooling System) |
| Conex Damper with Damper Ring |
| Lead Wires Integrated into Damper for High Reliability and Improved Power Transfer |
| Projected Pole Yoke with Vented Pole |
| High-Energy Ferrite Magnet with Bumped Back Plate |
| Low-Q Design for use in Small Sealed Box (1.2 cubic foot recommended) |
Specifications
| 600 Watts Max Music Power |
| 300 Watts Nominal Power Handling |
| Frequency Response: 18-2,000Hz |
| Sensitivity (Efficiency): 89dB (1W/1m) |
| 4ohm Rated |
TS-WX121
Features
| 12" Foamed IMPP (Injection Molded Polypropylene) Rigilite™ Composite Cone (Silver) |
| One-Piece Construction for Reduced Distortion |
| Dual-Layer Urethane Surround |
| Integrated Direct Voice Coil Mounting Ring |
| Conex Damper with Damper Ring |
| Lead Wires Integrated into Damper for High Reliability and Improved Power Transfer |
| Glass-Imide Voice Coil Bobbin |
| Projected Pole Yoke with Vented Pole |
| Bass-Reflex Design with Side Port |
| Thick Wood Enclosure for Richer Bass Response |
| Ideal Design for Sport-Utility Vehicles (SUV’s) and Hatchbacks |
Specifications
| 400 Watts Max. Music Power (100 Watts Nominal) |
| Sensitivity (Efficiency): 106dB (In-car) (1W/1m) |
| Frequency Response: 20 - 1,500Hz |
| 4W Rated |
| Dimensions: 18-7/8" x 13-1/2" x 14-1/8" |
TS-X101
Features
| 10" Foamed IMPP (Injection Molded Polypropylene) Rigilite™ Composite Cone (Silver) |
| One-Piece Construction for Reduced Distortion |
| Dual-Layer Urethane Surround |
| Integrated Direct Voice Coil Mounting Ring |
| Conex Damper with Damper Ring |
| Lead Wires Integrated into Damper for High Reliability and Improved Power Transfer |
| Glass-Imide Voice Coil Bobbin |
| Projected Pole Yoke with Vented Pole |
| Bass-Reflex Design with Side Port |
| Thick Wood Enclosure for Richer Bass Response |
| Ideal Design for Sport-Utility Vehicles (SUV’s) and Hatchbacks |
Specifications
| 350 Watts Max. Music Power (80 Watts Nominal) |
| Sensitivity (Efficiency): 104dB (In-car) (1W/1m) |
| Frequency Response: 20 - 1,800Hz |
| 4W Rated |
| Dimensions: 18-7/8" x 12" x 16" |
TS-W384C
Features
| 15" Foamed IMPP (Injection Molded Polypropylene) Rigilite Composite Cone Woofer |
| Dual-Layer Urethane Surround |
| Direct Bobbin Mounted VCCS (Voice Coil Cooling System) |
| Conex Damper with Damper Ring |
| Lead Wires Integrated into Damper for High Reliability and Improved Power Transfer |
| Projected Pole Yoke with Vented Pole |
| High-Energy Ferrite Magnet with Bumped Back Plate |
| Low-Q Design for use in Small Sealed Box (2.0 cubic foot recommended) |
Specifications
| 700 Watts Max Music Power |
| 350 Watts Nominal Power Handling |
| Frequency Response: 15-1,500Hz |
| Sensitivity (Efficiency): 91dB (1W/1m) |
| 4ohm Rated |
|
TS-W384DVC
Features
| Foamed IMPP (Injection Molded Polypropylene) Rigilite Composite Cone Woofer |
| Dual-Layer Urethane Surround |
| Direct Bobbin Mounted VCCS (Voice Coil Cooling System) |
| Conex Damper with Damper Ring |
| Lead Wires Integrated into Damper for High Reliability and Improved Power Transfer |
| Projected Pole Yoke with Vented Pole |
| High-Energy Ferrite Magnet with Bumped Back Plate |
| Low-Q Design for use in Small Sealed Box (2.0 cubic foot recommended) |
| Dual Voice Coil (2x4ohm) Design for Increased System Flexibility |
Specifications
| 700 Watts Max Music Power |
| 350 Watts Nominal Power Handling |
| Frequency Response: 15-1,500Hz |
| Sensitivity (Efficiency): 91dB (1W/1m) |
| 2ohm or 8ohm Rated |
|
||||
Mark I Logo is a Registered Trademark of Mark I
Electronics